MORGAN

Ver todos
Ver todos
Aston “Dining”
Dibbets Frame "Tonneau"
Ver todos
Aston “Dining”
Dibbets Frame "Tonneau"
Lang "Console"
Ver todos
Aston “Dining”
Lang "Console"
Ver todos
Aston “Dining”
COLLAR
Ver todos
Aston “Dining”
Ver todos
Aston “Dining”
Ver todos
Aston “Dining”
Ver todos
Aston “Dining”

Morgan se inspira en la tradición de la mesa estilo refectorio, interpretada en clave contemporánea a través de una serie de soluciones formales sumamente elegantes y de la combinación de materiales nobles y evocadores.

Los soportes están realizados en chapa bronceada y se caracterizan por su sección ahusada romboidal, que estiliza la base de la mesa, mientras que el tablero se distingue por su canto abocinado y está disponible en los acabados Roble flameado teñido Tabaco, Roble flameado lacado Moka, Ébano mate y lacado brillante en los colores Sand, Caramel y Granito.

Morgan está disponible en múltiples dimensiones y su conformación permite realizar tableros a medida. Además de en versión rectangular, está disponible con tablero redondo, apoyado sobre tres soportes de chapa bronceada.

La tradición de la mesa estilo refectorio reinterpretada en clave contemporánea a través de una serie de soluciones formales sumamente elegantes y de la combinación de materiales nobles y evocadores.

Projects

Perth, Keane Street Peppermint Grove

El chalé «Keane Street Peppermint Grove» se encuentra en un elegante barrio de Perth.

Technical Features

Top
Fir blockboard with oak veneer, with solid wood perimeter edge, beveled (except for the Ø 160 cm, Ø 180 cm and Ø 200cm with flamed oak Tobacco stained finish and Moka open pore lacquer finish and composite ebony veneer with matt finish, which have a flat edge). The top rests on Ø 100 mm chrome cylinders.
Top finishes
Sand, Caramel or Granite color glossy lacquer, 40 mm thick; open pore flamed oak Moka lacquered, 40 mm thick; open pore flamed oak Tobacco stain, 40 mm thick; composite ebony veneer with matt finish (for round tops only).
Vertical metal supports
In satin-finish metal, load- bearing diamond shaped section, Bronze satin finish. Each support is sheathed in two MDF panels and then two laser- cut metal sheets, bent, welded and electroplated. Since the satin finish is handcrafted, the table supports may exhibit slightly different nuances. Protective slide in ribbed black rubber.
N.B.
Electroplating is an industrial process used to obtain surface finishes in bronze, gold, chrome and Black-Nickel; it also provides surface hardness and resistance to rust and corrosion.

Modelos 2D

Las dimensiones indicadas en los archivos CAD pueden variar ligeramente respecto a las medidas que figuran en la ficha de producto. N.B.: los archivos CAD presentes en el sitio web están protegidos por derechos de autor y son propiedad exclusiva de Minotti SpA. La empresa solamente autoriza su uso en el ámbito del diseño de interiores. Se prohíbe terminantemente cualquier otro uso

Modelos 3D

Las dimensiones indicadas en los archivos CAD pueden variar ligeramente respecto a las medidas que figuran en la ficha de producto. N.B.: los archivos CAD presentes en el sitio web están protegidos por derechos de autor y son propiedad exclusiva de Minotti SpA. La empresa solamente autoriza su uso en el ámbito del diseño de interiores. Se prohíbe terminantemente cualquier otro uso

Download immagine bassa risoluzione

Las imágenes presentes en el sitio web están protegidas por derechos de autor y son propiedad exclusiva de Minotti SpA.
Se prohíbe expresamente cualquier modificación de las mismas, aunque sea parcial.
Al descargar la imagen seleccionada confirmas que has leído y aceptado los Derechos de propiedad intelectual e industrial

All the contents of the Website shall be deemed to be protected and safeguarded by current provisions concerning copyright and intellectual and industrial property rights.
The material available on the Website may not be extracted or reused, reproduced in full or in part, distributed, published or transmitted, without the prior express written consent of MINOTTI. Any other activities that may be prejudicial to the legitimate interests of the authors and holders of rights concerning the original works and decorative models accessible thereon are forbidden. 
In addition to section 2 above, Website contents include, without limitation, any texts, photographs, filmed sequences and presentations, databanks, charts and tables, slogans, audio and video reproductions as well as any graphic and/or text representations in general. 
All the trademarks, domain names, corporate names, business names and marks available on the Website shall be the sole property of MINOTTI and are thus protected by current provisions concerning hallmarks. Therefore, it is absolutely forbidden to reproduce the said names and marks, in any form or manner, without the prior express written consent of MINOTTI, nor may the trademark “MINOTTI” be registered in any top level domain.
The pages of the Website might contain trademarks, domain names, corporate names, business names and marks owned by third parties, with whom MINOTTI co-operates in different capacities; the said names and marks shall be protected by current provisions concerning copyright and intellectual and industrial property rights, just like the hallmarks of MINOTTI.
Finally, MINOTTI hereby informs that it is absolutely forbidden to use any and all hallmarks owned by MINOTTI as metatags – that is, any HTML element which does not involve displaying or formatting a certain control, while providing electronic agents or search engines with instructions, to increase the availability of any website other than the websites connected with MINOTTI.

Website Contents
The Internet site www.minotti.com is an on-line information portal which brings the user up-to-date about Minotti and the products and services of Minotti, with a view to providing an overview of the main lines of business, products and services of MINOTTI.
All the contents of the Website (including, without limitation, news, images, video photographs, sounds, trademarks, logos, domain names, application software, graphic layouts, technical documentation, manuals and presentations) and the rights related thereto shall be deemed to be reserved; therefore, the said contents may only be consulted for personal information, any other use being expressly forbidden without the prior written consent of MINOTTI.
MINOTTI and the managers, directors, partners and/or employees of MINOTTI do not provide any guarantee as to the functionality of the Website, and the accuracy and completeness of the contents published on the Website; in addition, MINOTTI hereby reserves the right to modify and update the said information without notice at any time, at the sole discretion of MINOTTI.
In no event may MINOTTI or the managers, administrators, partners and/or employees of MINOTTI be held responsible, in any capacity and for any reason, for the functionality of the Website or for any damage arising from the use of, or failure to use, the Website and contents thereof, or from omissions, inaccuracies or mistakes in the contents of the Website.
The software programmes related to the Website and the Website might malfunction and contain some viruses or any other harmful elements. Hence the user of the Website and contents thereof hereby takes full and unconditional responsibility for any loss, damage and cost that might result for the user from the use of the Website.

Website Use
The contents of the Website may not – whether in full or in part – be copied, reproduced, republished, uploaded, transcribed, transmitted or distributed, in any manner or form, without the prior written consent of MINOTTI. In addition, the contents of the Website may not be disclosed – whether in full or in part – through communication channels, e.g. the Internet, TV systems, radio systems or any other systems, without the prior written consent of MINOTTI. 
Furthermore, the information and material available on the Website may not be used for commercial purposes with a view to creating databanks varying in type, nor may the said information and material be stored (whether in full or in part) in pre-existing databanks, whether accessible only to the creator or made available to third parties.

Linking and Framing
No links to the home page of the Website currently available at the web address http://www.minotti.com/ or to any other internal page of the Website may be created without the prior written consent of MINOTTI.
Any specific links that do not refer the user to an internal page via the home page of the Website currently available at the web address http://www.minotti.com/ (“deep linking”) are hereby expressly forbidden; automatic input links (“inline linking”), which allow the user to automatically display images from the Website in a specific space are not allowed either.
“Framing links”, which allow a page of the Website to be displayed on a certain page of another website, while making sure that the contents of the said page are displayed in a dedicated frame, instead of being shown in an independent window of the surfing browser, are also forbidden.
In this respect, it should be pointed out that failure to comply with the provisions of this section may be prosecuted in relation, for example, to unfair competition, as governed by current relevant provisions.

Modification
These terms of use may be modified by MINOTTI without notice at any time, provided that the users periodically examine the said terms of use before accessing the contents of the Website. 

Applicable Law and Place of Jurisdiction
These terms of use shall be governed by and construed in accordance with the Italian law.
Subject to the foregoing, any controversy arising out of or relating to the use of this Website, with specific reference to these terms of use, shall be settled by the Court of Milan.
Since these terms of use shall be construed in accordance with the laws of Italy, in the event of any disagreement in the interpretation of these terms of use between the Italian version and the English version, the Italian version shall prevail.

CONFERMO E PROCEDO