Torii

Torii

View all
View all
Dibbets Barcode
View all
Dibbets Barcode
View all
Oliver "Lounge"

Torii

일본 전통과 연결된 구조적 디테일이 돋보이는 가볍고 경쾌한 Torii 모듈형 시트는 둥근 엣지의 볼륨, 슬림한 프로파일, 그리고 극도로 정교한 디자인에서 비롯된 겉보기의 형식적 단순함을 유연하게 조화시킵니다.

시트와 테이블 다리의 메탈 구조는 일본 신사의 입구 게이트인 ‘토리이(torii)’의 이미지를 연상시키는 Nendo의 오마주입니다. 수직 지지대 위에 수평 요소를 얹는 맞물림 구조를 통해, couture 장인정신이 깃든 패딩 볼륨을 담아내는 세련된 시각적 가벼움을 구현합니다.

Torii 패밀리는 하이 또는 로우 백레스트와 팔걸이가 둥글게 마감된 선형 소파, 두 가지 서로 다른 깊이를 결합한 인클라인드 소파, 암체어와 라운지 및 다이닝 리틀 암체어, 오토만, 커피 테이블, 그리고 거실 공간 어디에나 배치하기 좋은 슬림한 타원형 콘솔 테이블을 포함합니다. 폭넓은 제품 구성은 유연한 레이아웃 설계를 가능하게 하며, 개별 요소를 조합해 강한 시각적 통일감을 연출할 수 있습니다. Torii 패밀리의 구성 요소에 공통적으로 적용된 메탈 프레임은 Nendo가 언급하듯 ‘센본 토리이(Senbon Torii), 즉 1,000개의 주홍색 토리이 게이트로 이루어진 목조 회랑’의 이미지를 환기시킵니다.

슬림한 백레스트에는 수직 퀼팅과 쿠셔닝 가장자리를 따라 이어지는 파이핑이 적용되어, 제작의 couture 퀄리티를 강조합니다. 에코 레더와 에코 누벅 파이핑은 패브릭과 매치될 경우 동일한 톤 내에서 약간 대비되는 컬러로, 가죽 버전은 가죽 업홀스터리와 동일한 컬러로 제공됩니다. 시스템의 모든 업홀스터드 요소는 커버 선택을 통해 커스터마이징이 가능하며, 100% 패브릭 또는 가죽, 혹은 패브릭에 가죽 베이스 조합으로 선택할 수 있습니다.

시트에는 동일한 베이스 메탈 디테일이 적용된 가죽 매거진 캐디를 액세서리로 더할 수 있으며, 이는 고급 러기지 제작 기법으로 완성되었습니다. 다리의 수평 메탈 요소 끝부분은 등받이와 시트를 거의 감싸는 듯한 형태로 설계되어, 일본 목조건축 전통에서 차용한 키구미(Kigumi) 기법을 연상시킵니다. 끝단에 주얼 버튼처럼 배치된 블랙-니켈 마감의 작은 장식 디스크는 전체에 정교한 포인트를 더하며, 브론즈 컬러 바니시드 메탈 다리와의 대비를 만들어냅니다.

완벽한 원형 형태의 암체어와 스위블 암체어는 기능성과 인체공학적 요구를 모두 충족하도록 다양한 타입으로 설계되었습니다. 베르제르, 라지, 미디엄, 스몰 버전의 시트와 다이닝, 다이닝 라지, 라운지 리틀 암체어는 장인정신의 세련된 단순함을 최적으로 표현하기 위한 심도 깊은 연구의 결과물입니다. 베이스는 가죽 또는 패브릭으로 제공됩니다.

일부 요소에서는 베이스가 확장되며, 무광 폴리에스터 래커 마감의 칼라카타 또는 스톤 그레이 마블 상판이 적용됩니다. 이는 비례, 두께, 구조적 디테일을 면밀히 연구해 제작되어, 미학적으로도 시트와 완벽하게 어우러집니다.

스몰 암체어는 단단한 애쉬 원목 프레임에 비엔나 스트로에서 영감을 받은 패턴의 브레이드 가죽 백레스트를 적용한 Torii Nest 버전으로도 제공되며, 동일한 소재의 베이스 위에 놓입니다.

Torii 커피 테이블 역시 브론즈 컬러 바니시드 메탈 프레임과 블랙-니켈 메탈 디테일 등 시트와 동일한 구조적 스타일을 공유합니다. 최대 지름 120cm에 이르는 다양한 사이즈와 여러 높이로 제공되며, 무광 폴리에스터 마감의 칼라카타 또는 스톤 그레이 마블, 블랙 파트 드 베르(pâte de verre), 혹은 리코리스 컬러 브러시드 애쉬 우드 상판이 리코리스 컬러 무광 래커 프레임에 둘러싸인 형태로 완성됩니다.

수평 요소는 수직 지지대 위에 얹혀져, couture 장인정신이 깃든 패딩 볼륨을 담아내는 세련된 시각적 가벼움을 구현합니다.

Technical Features

SOFA LOW CM 184
ANGLED SOFA LOW CM 220
SOFA LOW CM 198
SOFA HIGH CM 198
SOFA LOW CM 244
SOFA HIGH CM 244
SOFA LOW CM 292
SOFA HIGH CM 292
INCLINED SOFA LOW CM 247
INCLINED SOFA WITH 1 ARMREST LOW CM 252
INCLINED SOFA WITH 1 ARMREST HIGH CM 252
INCLINED OPEN-END SOFA LOW CM 252
INCLINED OPEN-END SOFA HIGH CM 252
INCLINED SOFA WITH TOP LOW CM 252
INCLINED SOFA WITH TOP HIGH CM 252
BENCH WITH TOP
BENCH
SEMI-ROUND OTTOMAN
OPTIONAL BACKREST CUSHION CM 65X60
OPTIONAL BACKREST CUSHION CM 65X45
OPTIONAL BACKREST CUSHION CM 55X55
OPTIONAL CUSHION CM 45X45
OPTIONAL LUMBAR CUSHION LOW CM 63X27
OPTIONAL LUMBAR CUSHION HIGH CM 63X22
MAGAZINE CADDY CM 55X92
BERGÈRE - FIXED
BERGÈRE - SWIVEL
LARGE ARMCHAIR - FIXED
LARGE ARMCHAIR - SWIVEL
MEDIUM ARMCHAIR - FIXED
MEDIUM ARMCHAIR - SWIVEL
SMAL ARMCHAIR - FIXED
SMAL ARMCHAIR - SWIVEL
SMALL OTTOMAN
MEDIUM OTTOMAN
LOUNGE LITTLE ARMCHAIR - FIXED
LOUNGE LITTLE ARMCHAIR - SWIVEL
DINING LITTLE ARMCHAIR - FIXED
DINING LITTLE ARMCHAIR - SWIVEL
DINING LARGE LITTLE ARMCHAIR - FIXED
DINING LARGE LITTLE ARMCHAIR - SWIVEL
TORII NEST - ARMCHAIR - FIXED
TORII NEST - ARMCHAIR - SWIVEL
Structure
Seat in metal-reinforced plywood. The seat structure is padded with high-resilience, variable-density polyurethane foam with high-rubbercontent elastic webbing to maximize comfort. Metal backrest coated in high-resilience polyurethane foam, covered in breathable heat-bonded fiber laminated to white, hypoallergenic cotton fabric to lend softness. The backrest/armrest structure and its internal casing feature a quilted vertical slat pattern finished with double stitching and piping around the perimeter. The piping is made of eco-leather and/or eco-nubuck (a dry-cleanable material) and comes in the following colours: - Eco-Leather: White, Cloud, Sand, Havana, Ice, Chestnut, Peat, Baltic, Burgundy, Smoke, Cast-Iron, Black, Mustard, Cognac, Corten; - Eco-Nabuk: Cloud, Mink, Ice, Moka, Baltic, Burgundy, Moss, Charcoal, Green, Cognac, Corten, Granite, Curry.
Cushions
backrest and seat cushions in channeled goose down (Assopiuma Gold Label certified) undergo routine sanitization as specified in EC Regulation No. 1069/2009, with core insert in high-resilience, variable-density polyurethane foam. The lumbar cushion is padded with high-resilience, variable-density polyurethane foam, then covered with breathable, heat-bonded fiber laminated to white cotton canvas and finished with piping.
Covers
Structure, seat and backrest cushion covers are completely removable in all versions (fabric and leather).
MAGAZINE CADDY
The LOW seating elements (low backrest) can be accessorized with a leather magazine caddy, tailored using the same techniques used for luggage, and enhanced with brass details, Black-Nickel finish that tie in with the base.
INFORMATION REGARDING THE MAGAZINE CADDY
- when the upholstered piece is upholstered entirely in fabric, the leather for the magazine caddy may be chosen from among the three available categories of leather: Leather, Extra leather and Nature leather; - when the upholstered piece is upholstered entirely in leather, the leather for the magazine caddy is the same as that chosen for the upholstered piece; - when the upholstered piece has a base in Cat. Nature leather, the leather for the magazine caddy will be the same as that chosen for the base. N.B.: the magazine caddy cannot be paired with the HIGH seating; it is available only for the LOW seating.
Feet
Made of 25 mm Ø solid metal rods, varnished Bronze colour with polished anti-fingerprint finish; tip and decorative element in brass, Black-Nickel finish. Black protective SEBS glides.
INFORMATION REGARDING UPHOLSTERY AND COVERS
A) all-fabric or all-leather upholstery; B) base upholstered in Cat. Nature Leather; backrest, seat and backrest cushions in fabric.
N.B.
The inclined sofa with 250 cm TOP, HIGH and LOW versions and bench with 180 cm TOP, have the top in 20 mm thick Calacatta or Stone Grey marble with matt polyester coating, supported by an aluminium honeycomb panel.

2d files

The dimensions shown in the CAD files could differ slightly from those indicated on the product sheet. N.B.: the CAD files available on our website are copyright-protected and are proprietary to Minotti SpA. The company authorizes their use exclusively for interior design purposes. Any other use is strictly prohibited.

3d files

The dimensions shown in the CAD files could differ slightly from those indicated on the product sheet. N.B.: the CAD files available on our website are copyright-protected and are proprietary to Minotti SpA. The company authorizes their use exclusively for interior design purposes. Any other use is strictly prohibited.

All designs and models of the 2020 collection are owned by Minotti S.p.A. and are protected in the European Union and China.
All rights are exclusively reserved to Minotti S.p.A., worldwide.

Download immagine bassa risoluzione

The images available on our website are copyright-protected and are proprietary to Minotti SpA.
Any modification, even in part, is expressly prohibited.
By downloading the selected image, you confirm you have read and accepted the terms and conditions in the Intellectual and industrial property rights

All the contents of the Website shall be deemed to be protected and safeguarded by current provisions concerning copyright and intellectual and industrial property rights.
The material available on the Website may not be extracted or reused, reproduced in full or in part, distributed, published or transmitted, without the prior express written consent of MINOTTI. Any other activities that may be prejudicial to the legitimate interests of the authors and holders of rights concerning the original works and decorative models accessible thereon are forbidden. 
In addition to section 2 above, Website contents include, without limitation, any texts, photographs, filmed sequences and presentations, databanks, charts and tables, slogans, audio and video reproductions as well as any graphic and/or text representations in general. 
All the trademarks, domain names, corporate names, business names and marks available on the Website shall be the sole property of MINOTTI and are thus protected by current provisions concerning hallmarks. Therefore, it is absolutely forbidden to reproduce the said names and marks, in any form or manner, without the prior express written consent of MINOTTI, nor may the trademark “MINOTTI” be registered in any top level domain.
The pages of the Website might contain trademarks, domain names, corporate names, business names and marks owned by third parties, with whom MINOTTI co-operates in different capacities; the said names and marks shall be protected by current provisions concerning copyright and intellectual and industrial property rights, just like the hallmarks of MINOTTI.
Finally, MINOTTI hereby informs that it is absolutely forbidden to use any and all hallmarks owned by MINOTTI as metatags – that is, any HTML element which does not involve displaying or formatting a certain control, while providing electronic agents or search engines with instructions, to increase the availability of any website other than the websites connected with MINOTTI.

Website Contents
The Internet site www.minotti.com is an on-line information portal which brings the user up-to-date about Minotti and the products and services of Minotti, with a view to providing an overview of the main lines of business, products and services of MINOTTI.
All the contents of the Website (including, without limitation, news, images, video photographs, sounds, trademarks, logos, domain names, application software, graphic layouts, technical documentation, manuals and presentations) and the rights related thereto shall be deemed to be reserved; therefore, the said contents may only be consulted for personal information, any other use being expressly forbidden without the prior written consent of MINOTTI.
MINOTTI and the managers, directors, partners and/or employees of MINOTTI do not provide any guarantee as to the functionality of the Website, and the accuracy and completeness of the contents published on the Website; in addition, MINOTTI hereby reserves the right to modify and update the said information without notice at any time, at the sole discretion of MINOTTI.
In no event may MINOTTI or the managers, administrators, partners and/or employees of MINOTTI be held responsible, in any capacity and for any reason, for the functionality of the Website or for any damage arising from the use of, or failure to use, the Website and contents thereof, or from omissions, inaccuracies or mistakes in the contents of the Website.
The software programmes related to the Website and the Website might malfunction and contain some viruses or any other harmful elements. Hence the user of the Website and contents thereof hereby takes full and unconditional responsibility for any loss, damage and cost that might result for the user from the use of the Website.

Website Use
The contents of the Website may not – whether in full or in part – be copied, reproduced, republished, uploaded, transcribed, transmitted or distributed, in any manner or form, without the prior written consent of MINOTTI. In addition, the contents of the Website may not be disclosed – whether in full or in part – through communication channels, e.g. the Internet, TV systems, radio systems or any other systems, without the prior written consent of MINOTTI. 
Furthermore, the information and material available on the Website may not be used for commercial purposes with a view to creating databanks varying in type, nor may the said information and material be stored (whether in full or in part) in pre-existing databanks, whether accessible only to the creator or made available to third parties.

Linking and Framing
No links to the home page of the Website currently available at the web address http://www.minotti.com/ or to any other internal page of the Website may be created without the prior written consent of MINOTTI.
Any specific links that do not refer the user to an internal page via the home page of the Website currently available at the web address http://www.minotti.com/ (“deep linking”) are hereby expressly forbidden; automatic input links (“inline linking”), which allow the user to automatically display images from the Website in a specific space are not allowed either.
“Framing links”, which allow a page of the Website to be displayed on a certain page of another website, while making sure that the contents of the said page are displayed in a dedicated frame, instead of being shown in an independent window of the surfing browser, are also forbidden.
In this respect, it should be pointed out that failure to comply with the provisions of this section may be prosecuted in relation, for example, to unfair competition, as governed by current relevant provisions.

Modification
These terms of use may be modified by MINOTTI without notice at any time, provided that the users periodically examine the said terms of use before accessing the contents of the Website. 

Applicable Law and Place of Jurisdiction
These terms of use shall be governed by and construed in accordance with the Italian law.
Subject to the foregoing, any controversy arising out of or relating to the use of this Website, with specific reference to these terms of use, shall be settled by the Court of Milan.
Since these terms of use shall be construed in accordance with the laws of Italy, in the event of any disagreement in the interpretation of these terms of use between the Italian version and the English version, the Italian version shall prevail.

CONFERMO E PROCEDO