Brasilia Bed

The same Mid-Century Contemporary style that distinguishes the large, varied collection of Brasilia seats, also characterises the design of the night area, introducing a bed with a bold personality. Airy, and elevated from the ground, it sports a large wooden equipped headboard that embraces the padded part of the bed, the latter available in two heights.

Its enveloping Dark Brown stained palisander Santos or in open-pore oak with a Honey stained veneer structure is characterised by its staved headboard and ends in two bedside tables/occasional tables, one at each side. 
These are available in two versions, one with shelf and one with drawer; both are suspended and available in two sizes.

The boxspring base, on which the mattress lies, is available with the fabric or leather covering, the same featured on the padded headboard, enhanced with stitching.

The bed also comes in a more minimal version, without the wooden structure. 
Each size of the boxspring base, in a choice of five widths, can generate various configurations, based on the choice of equipped headboard and its accessories, drawer or shelf.

Technical Features

SOMMIER AND HEADBOARD CM 169X230 H88
SOMMIER AND HEADBOARD CM 189X230 H88
SOMMIER AND HEADBOARD CM 209X230 H88
SOMMIER AND HEADBOARD QUEEN SIZE CM 162X233 H88
SOMMIER AND HEADBOARD KING SIZE CM 202X233 H88
SOMMIER AND HEADBOARD HIGH CM 169X230 H102
SOMMIER AND HEADBOARD HIGH CM 189X230 H102
SOMMIER AND HEADBOARD HIGH CM 209X230 H102
SOMMIER AND HEADBOARD QUEEN SIZE HIGH CM 162X233 H102
SOMMIER AND HEADBOARD KING SIZE HIGH CM 202X233 H102
SMALL ELEMENT WITH DRAWER 62X52,5 - PALISANDER VERSION
SMALL ELEMENT WITH DRAWER 62X52,5 - OAK VERSION
LARGE ELEMENT WITH DRAWER 92X52,5 - PALISANDER VERSION
LARGE ELEMENT WITH DRAWER 92X52,5 - OAK VERSION
SMALL ELEMENT WITH SHELF 62X52,5 - PALISANDER VERSION
SMALL ELEMENT WITH SHELF 62X52,5 - OAK VERSION
LARGE ELEMENT WITH SHELF 92X52,5 - PALISANDER VERSION
LARGE ELEMENT WITH SHELF 92X52,5 - OAK VERSION
SOFT VERSION - BED CM 169X223 H88
SOFT VERSION - BED CM 189X223 H88
SOFT VERSION - BED CM 209X223 H88
SOFT VERSION - BED QUEEN SIZE CM 162X226 H88
SOFT VERSION - BED KING SIZE CM 202X226 H88
SOFT HIGH VERSION - BED CM 169X223 H102
SOFT HIGH VERSION - BED CM 189X223 H102
SOFT HIGH VERSION - BED CM 209X223 H102
SOFT HIGH VERSION - BED QUEEN SIZE CM 162X226 H102
SOFT HIGH VERSION - BED KING SIZE CM 202X226 H102
NIGHTSTAND WITH 1 DRAWER CM 70X48 - PALISANDER VERSION
NIGHTSTAND WITH 1 DRAWER CM 70X48 - OAK VERSION
Structure
One-piece free-standing bed frame in very thick plywood. The bed frame is designed to accommodate pocket springs covered with a surface layer of high-resilience (CF-free) polyurethane foam. A perforated plywood panel, placed under the springs, facilitates air circulation. An additional perforated technical fabric covering on the upper part of the bed frame allows greater circulation of air throughout the spring structure. Headboard in plywood, padded with high-resilience, variable-density polyurethane foam. Bed frame and headboard are then covered with heat-bonded fibre laminated to white cotton fabric that lends a soft fluffiness to the padding while isolating it from the fabric, ensuring the product is hygienic. The padded headboard upholstery is embellished with top-stitching.
Covers
Completely removable fabric or leather upholstery. To facilitate upholstery removal, the headboard can be lifted out of the bed frame by means of the handles located at the bottom.
Feet
Made of 25 mm Ø satin-finish solid metal rods, varnished polished Brandy colour, with varnished polished Brandy colour metal tip. Adjustable black polyethylene glides.
Accessorized headboard
- in Palisander Santos*, with Dark Brown stained veneer: headboard made up of a central element in 81mm-thick honeycomb MDF, with palisander Santos* veneer, stained Dark Brown and polyester matt lacquer finish, to which the headboard is attached. Sides, drawers (finished inside and out) and shelves in MDF with palisander Santos* veneer stained Dark Brown and polyester matt lacquer finish. MDF slats measuring 81x21mm, with palisander Santos* veneer stained Dark Brown and polyester matt lacquer finish. The slats are held together with aluminium rods. Drawers glide on full-extension runners with Blumotion closure. Aluminium handles with varnished polished Brandy colour finish. Rests on levelling feet in ABS.
- in oak, with honey stained veneer: headboard made up of a central element in 81 mm-thick honeycomb MDF, with a Honey stained open pore oak veneer, to which the headboard is attached. Sides, drawers (finished inside and out) and shelves in MDF with Honey stained open pore oak veneer. MDF slats measuring 81x21 mm, with Honey stained open pore oak veneer. The slats are held together with aluminium rods. Drawers glide on full-extension runners with Blumotion closure. Aluminium handles with varnished polished Brandy colour finish. Rests on levelling feet in ABS. The headboard and the accessories don’t require any wall anchoring. * palisander Santos comes from properly managed forests.
N.B.
Given the architecture of the bed, it is not possible to insert a slatted base or adjust mattress height.

2d files

The dimensions shown in the CAD files could differ slightly from those indicated on the product sheet. N.B.: the CAD files available on our website are copyright-protected and are proprietary to Minotti SpA. The company authorizes their use exclusively for interior design purposes. Any other use is strictly prohibited.

BRASILIA_BED.DWG

3d files

The dimensions shown in the CAD files could differ slightly from those indicated on the product sheet. N.B.: the CAD files available on our website are copyright-protected and are proprietary to Minotti SpA. The company authorizes their use exclusively for interior design purposes. Any other use is strictly prohibited.

WARNING
All designs and models of the 2021 collection are owned by Minotti s.p.a. and have been registered in the European Union and China on june 16th 2021. All related rights are exclusively reserved to Minotti s.p.a., worldwide.
Therefore, Minotti s.p.a. will have the right to take legal action, in any jurisdiction, against any counterfeiting case and violation of its intellectual property rights.

Download immagine bassa risoluzione

The images available on our website are copyright-protected and are proprietary to Minotti SpA.
Any modification, even in part, is expressly prohibited.
By downloading the selected image, you confirm you have read and accepted the terms and conditions in the Intellectual and industrial property rights

All the contents of the Website shall be deemed to be protected and safeguarded by current provisions concerning copyright and intellectual and industrial property rights.
The material available on the Website may not be extracted or reused, reproduced in full or in part, distributed, published or transmitted, without the prior express written consent of MINOTTI. Any other activities that may be prejudicial to the legitimate interests of the authors and holders of rights concerning the original works and decorative models accessible thereon are forbidden. 
In addition to section 2 above, Website contents include, without limitation, any texts, photographs, filmed sequences and presentations, databanks, charts and tables, slogans, audio and video reproductions as well as any graphic and/or text representations in general. 
All the trademarks, domain names, corporate names, business names and marks available on the Website shall be the sole property of MINOTTI and are thus protected by current provisions concerning hallmarks. Therefore, it is absolutely forbidden to reproduce the said names and marks, in any form or manner, without the prior express written consent of MINOTTI, nor may the trademark “MINOTTI” be registered in any top level domain.
The pages of the Website might contain trademarks, domain names, corporate names, business names and marks owned by third parties, with whom MINOTTI co-operates in different capacities; the said names and marks shall be protected by current provisions concerning copyright and intellectual and industrial property rights, just like the hallmarks of MINOTTI.
Finally, MINOTTI hereby informs that it is absolutely forbidden to use any and all hallmarks owned by MINOTTI as metatags – that is, any HTML element which does not involve displaying or formatting a certain control, while providing electronic agents or search engines with instructions, to increase the availability of any website other than the websites connected with MINOTTI.

Website Contents
The Internet site www.minotti.com is an on-line information portal which brings the user up-to-date about Minotti and the products and services of Minotti, with a view to providing an overview of the main lines of business, products and services of MINOTTI.
All the contents of the Website (including, without limitation, news, images, video photographs, sounds, trademarks, logos, domain names, application software, graphic layouts, technical documentation, manuals and presentations) and the rights related thereto shall be deemed to be reserved; therefore, the said contents may only be consulted for personal information, any other use being expressly forbidden without the prior written consent of MINOTTI.
MINOTTI and the managers, directors, partners and/or employees of MINOTTI do not provide any guarantee as to the functionality of the Website, and the accuracy and completeness of the contents published on the Website; in addition, MINOTTI hereby reserves the right to modify and update the said information without notice at any time, at the sole discretion of MINOTTI.
In no event may MINOTTI or the managers, administrators, partners and/or employees of MINOTTI be held responsible, in any capacity and for any reason, for the functionality of the Website or for any damage arising from the use of, or failure to use, the Website and contents thereof, or from omissions, inaccuracies or mistakes in the contents of the Website.
The software programmes related to the Website and the Website might malfunction and contain some viruses or any other harmful elements. Hence the user of the Website and contents thereof hereby takes full and unconditional responsibility for any loss, damage and cost that might result for the user from the use of the Website.

Website Use
The contents of the Website may not – whether in full or in part – be copied, reproduced, republished, uploaded, transcribed, transmitted or distributed, in any manner or form, without the prior written consent of MINOTTI. In addition, the contents of the Website may not be disclosed – whether in full or in part – through communication channels, e.g. the Internet, TV systems, radio systems or any other systems, without the prior written consent of MINOTTI. 
Furthermore, the information and material available on the Website may not be used for commercial purposes with a view to creating databanks varying in type, nor may the said information and material be stored (whether in full or in part) in pre-existing databanks, whether accessible only to the creator or made available to third parties.

Linking and Framing
No links to the home page of the Website currently available at the web address http://www.minotti.com/ or to any other internal page of the Website may be created without the prior written consent of MINOTTI.
Any specific links that do not refer the user to an internal page via the home page of the Website currently available at the web address http://www.minotti.com/ (“deep linking”) are hereby expressly forbidden; automatic input links (“inline linking”), which allow the user to automatically display images from the Website in a specific space are not allowed either.
“Framing links”, which allow a page of the Website to be displayed on a certain page of another website, while making sure that the contents of the said page are displayed in a dedicated frame, instead of being shown in an independent window of the surfing browser, are also forbidden.
In this respect, it should be pointed out that failure to comply with the provisions of this section may be prosecuted in relation, for example, to unfair competition, as governed by current relevant provisions.

Modification
These terms of use may be modified by MINOTTI without notice at any time, provided that the users periodically examine the said terms of use before accessing the contents of the Website. 

Applicable Law and Place of Jurisdiction
These terms of use shall be governed by and construed in accordance with the Italian law.
Subject to the foregoing, any controversy arising out of or relating to the use of this Website, with specific reference to these terms of use, shall be settled by the Court of Milan.
Since these terms of use shall be construed in accordance with the laws of Italy, in the event of any disagreement in the interpretation of these terms of use between the Italian version and the English version, the Italian version shall prevail.

CONFERMO E PROCEDO