Atlas Living System

Atlas Living System

Atlas Living System

Atlas는 리빙과 다이닝 공간을 위한 모듈형 오픈 시스템과 수납장 컬렉션입니다. 단단한 볼륨과 정제된 표면, 구조적인 디테일이 하나의 조형 언어로 이어지며 컬렉션 전체에 선명하고 일관된 인상을 부여합니다.

Atlas를 특징짓는 요소는 본체 양옆으로 돌출된 측면 구조입니다. 45도 각도로 정밀하게 가공한 광택 알루미늄 프로파일이 바닥까지 이어지며 다리 역할을 하고, 그 위를 본체와 동일한 우드 또는 유광 래커 패널이 감쌉니다. 컬렉션 전반의 윤곽을 결정하는 이 디테일은 Atlas만의 건축적인 인상을 만들어냅니다. 날카롭게 다듬은 절단면과 끊김 없이 이어지는 선은 각 요소의 낮고 수평적인 볼륨에도 동일하게 적용됩니다.

시스템 하단에는 하나 또는 두 개의 서랍으로 구성된 수납공간을 배치할 수 있습니다. 서랍 전면에는 손잡이를 드러내지 않고도 편리하게 여닫을 수 있는 매입형 홈을 적용했습니다. 선반과 니치, 수납장을 자유롭게 조합할 수 있어 오브제를 전시하는 공간부터 일상의 물건을 보관하는 구성까지 폭넓게 설계할 수 있습니다.

벽에 띄워 설치하는 도어형 수납장의 중앙에는 길게 뻗은 마름모 형태의 손잡이가 자리합니다. 내부는 빛을 반사하는 브론즈 미러로 마감했으며, 오픈 공간과 니치에는 밝기를 조절할 수 있는 조명 시스템을 더했습니다. 섬세하게 조율된 빛이 오브제와 소재의 표면을 은은하게 드러내며 공간에 깊이를 더합니다.

Atlas는 변화하는 생활 방식과 공간의 조건에 따라 유연하게 구성되는 시스템입니다. 엄격한 비례와 정교한 제작, 풍부한 소재가 어우러져 주거 공간 안에 우아하면서도 또렷한 존재감을 남깁니다.

두 가지 사이즈로 선보이는 리빙 수납장은 Atlas 특유의 낮게 이어지는 볼륨을 바탕으로 설계되었습니다. 우드 또는 하이글로시 래커 마감과 서랍 구성을 선택할 수 있으며, 베이스에는 폴딩 기법으로 가공한 마블 또는 스톤 상판을 더해 오브제를 놓을 수 있는 또 하나의 면을 마련했습니다.

컬렉션을 완성하는 다이닝 수납장 역시 두 가지 사이즈와 동일한 마감으로 제공됩니다. 중앙에는 넉넉한 서랍과 준비 및 서빙에 활용할 수 있는 상판이 자리하며, 양쪽 패널은 본체 바깥까지 길게 뻗어 선반을 지지합니다. 수납과 진열의 기능을 확장하는 동시에 Atlas 특유의 입체적인 구성을 강조합니다.

이 제품에는 FSC® 인증 목재 구성 요소가 포함되어 있습니다.

Focus On

Atlas는 모듈 구조를 기반으로 선반과 니치, 수납 유닛을 자유롭게 조합하며 다양한 공간 구성을 만들어냅니다. 정형화된 방식에서 벗어나 공간의 조건과 쓰임에 따라 유연하게 확장되는 구조는 높은 설계 자유도를 제공합니다.

오브제를 수납하는 동시에 드러내기 위해 설계된 Atlas는 기능과 미학 사이의 균형을 정교하게 구현합니다. 각각의 모듈은 다양한 방식으로 조합할 수 있으며, 변화하는 현대적 라이프스타일과 공간의 조건에 유연하게 대응합니다.

Technical Features

Module A - 134x45xh221 cm
Module B - 134x45xh221 cm
Module C - 134x45xh221 cm
Module D - 134x45xh221 cm
Module E - 194x45xh221 cm
Module F - 194x45xh221 cm
Module G - 194x45xh221 cm
Module H - 194x45xh221 cm
Lower container element 117x61xh33 cm
Lower container element 177x61xh33 cm
Composition 1 - 261x61xh221 cm
Composition 2 - 261x61xh221 cm
Composition 3 - 261x61xh221 cm
Composition 4 - 261x61xh221 cm
Composition 5 - 321x61xh221 cm
Composition 6 - 321x61xh221 cm
Composition 7 - 321x61xh221 cm
Composition 8 - 321x61xh221 cm
Composition 9 - 381x61xh221 cm
Composition 10 - 381x61xh221 cm
Composition 11 - 388x61xh221 cm
Composition 12 - 388x61xh221 cm
Composition 13 - 448x61xh221 cm
Composition 14 - 448x61xh221 cm
Composition 15 - 508x61xh221 cm
Composition 16- 508x61xh221 cm
Composition 23 - 508x61xh221 cm
Composition 17 - 568x61xh221 cm
Composition 18 - 568x61xh221 cm
Composition 19 - 575x61xh221 cm
Composition 20 - 575x61xh221 cm
Composition 21 - 635x61xh221 cm
Composition 22 - 635x61xh221 cm
Vertical side
Pieces in polished, brushed drawn aluminium, 50 mm thick, contoured, each one contains a metal counterweight. End caps for the upper uprights in polished brushed aluminium; end caps for the lower uprights in aluminium varnished black. MDF panels attached to the uprights, 10 mm thick, veneered in reconstituted Palisander, stained Dark Brown, matt polyester lacquer finish. Adjustable ABS feet attached to the side pieces.
Shelves
MDF shelves, 50 and 30 mm thick, veneered in reconstituted Palisander, stained Dark Brown, matt polyester lacquer finish. The 50 mm shelf is structural and contains a metal frame varnished matt black.
Upper container structure
Front and back of the upper container structure, where included, in MDF, 30 mm thick, Moka colour glossy lacquer finish. Internal structure is in reconstituted Palisander, stained Dark Brown, matt polyester lacquer finish. The structure is strengthened by a metal frame varnished matt black. The container can be composed of a compartment with flap door or, in some configurations, a compartment with flap door and a compartment with a sliding up door. A Bronzed mirror is applied to the back panel of the compartments. Profile and handle in polished stainless steel applied to the profile of the front that opens. Interior shelves and dividers in the upper cabinet also in MDF veneered in reconstituted Palisander, stained Dark Brown, matt polyester lacquer finish. Interior shelves and dividers are 30 mm thick.
Open compartments
Interior shelves and dividers in the open compartments in polished brushed aluminium, 10 mm thick. Back panel of the open compartment, where included, in MDF, 30 mm thick, veneered in reconstituted Palisander, stained Dark Brown, with matt polyester lacquer finish on the exterior and glossy on the interior.
LED strip light
All modules come with a dimmable LED strip light controlled by remote or integrated smart home systems. Compartments with a door contain a motion sensor that turns on the light.
Lower free-standing optional container
The Lower, Free-standing Optional Container is in MDF, 50 mm thick, veneered in reconstituted Palisander, stained Dark Brown, matt polyester lacquer finish. The interior finish is the same as the exterior. Base in matt black melamine. The element comes with one or two drawers. The large drawers glide on full-extension runners with Blumotion closure; maximum drawer load is 30 kg.

2d files

The dimensions shown in the CAD files could differ slightly from those indicated on the product sheet. N.B.: the CAD files available on our website are copyright-protected and are proprietary to Minotti SpA. The company authorizes their use exclusively for interior design purposes. Any other use is strictly prohibited.

ATLAS_LIVING_SYSTEM.DWG

3d files

The dimensions shown in the CAD files could differ slightly from those indicated on the product sheet. N.B.: the CAD files available on our website are copyright-protected and are proprietary to Minotti SpA. The company authorizes their use exclusively for interior design purposes. Any other use is strictly prohibited.

WARNING
All designs and models of the 2026 collection are owned by Minotti s.p.a. and have been registered in the European Union and China on April 16th 2026. All related rights are exclusively reserved to Minotti s.p.a., worldwide.
Therefore, Minotti s.p.a. will have the right to take legal action, in any jurisdiction, against any counterfeiting case and violation of its intellectual property rights.

Download immagine bassa risoluzione

The images available on our website are copyright-protected and are proprietary to Minotti SpA.
Any modification, even in part, is expressly prohibited.
By downloading the selected image, you confirm you have read and accepted the terms and conditions in the Intellectual and industrial property rights

All the contents of the Website shall be deemed to be protected and safeguarded by current provisions concerning copyright and intellectual and industrial property rights.
The material available on the Website may not be extracted or reused, reproduced in full or in part, distributed, published or transmitted, without the prior express written consent of MINOTTI. Any other activities that may be prejudicial to the legitimate interests of the authors and holders of rights concerning the original works and decorative models accessible thereon are forbidden. 
In addition to section 2 above, Website contents include, without limitation, any texts, photographs, filmed sequences and presentations, databanks, charts and tables, slogans, audio and video reproductions as well as any graphic and/or text representations in general. 
All the trademarks, domain names, corporate names, business names and marks available on the Website shall be the sole property of MINOTTI and are thus protected by current provisions concerning hallmarks. Therefore, it is absolutely forbidden to reproduce the said names and marks, in any form or manner, without the prior express written consent of MINOTTI, nor may the trademark “MINOTTI” be registered in any top level domain.
The pages of the Website might contain trademarks, domain names, corporate names, business names and marks owned by third parties, with whom MINOTTI co-operates in different capacities; the said names and marks shall be protected by current provisions concerning copyright and intellectual and industrial property rights, just like the hallmarks of MINOTTI.
Finally, MINOTTI hereby informs that it is absolutely forbidden to use any and all hallmarks owned by MINOTTI as metatags – that is, any HTML element which does not involve displaying or formatting a certain control, while providing electronic agents or search engines with instructions, to increase the availability of any website other than the websites connected with MINOTTI.

Website Contents
The Internet site www.minotti.com is an on-line information portal which brings the user up-to-date about Minotti and the products and services of Minotti, with a view to providing an overview of the main lines of business, products and services of MINOTTI.
All the contents of the Website (including, without limitation, news, images, video photographs, sounds, trademarks, logos, domain names, application software, graphic layouts, technical documentation, manuals and presentations) and the rights related thereto shall be deemed to be reserved; therefore, the said contents may only be consulted for personal information, any other use being expressly forbidden without the prior written consent of MINOTTI.
MINOTTI and the managers, directors, partners and/or employees of MINOTTI do not provide any guarantee as to the functionality of the Website, and the accuracy and completeness of the contents published on the Website; in addition, MINOTTI hereby reserves the right to modify and update the said information without notice at any time, at the sole discretion of MINOTTI.
In no event may MINOTTI or the managers, administrators, partners and/or employees of MINOTTI be held responsible, in any capacity and for any reason, for the functionality of the Website or for any damage arising from the use of, or failure to use, the Website and contents thereof, or from omissions, inaccuracies or mistakes in the contents of the Website.
The software programmes related to the Website and the Website might malfunction and contain some viruses or any other harmful elements. Hence the user of the Website and contents thereof hereby takes full and unconditional responsibility for any loss, damage and cost that might result for the user from the use of the Website.

Website Use
The contents of the Website may not – whether in full or in part – be copied, reproduced, republished, uploaded, transcribed, transmitted or distributed, in any manner or form, without the prior written consent of MINOTTI. In addition, the contents of the Website may not be disclosed – whether in full or in part – through communication channels, e.g. the Internet, TV systems, radio systems or any other systems, without the prior written consent of MINOTTI. 
Furthermore, the information and material available on the Website may not be used for commercial purposes with a view to creating databanks varying in type, nor may the said information and material be stored (whether in full or in part) in pre-existing databanks, whether accessible only to the creator or made available to third parties.

Linking and Framing
No links to the home page of the Website currently available at the web address http://www.minotti.com/ or to any other internal page of the Website may be created without the prior written consent of MINOTTI.
Any specific links that do not refer the user to an internal page via the home page of the Website currently available at the web address http://www.minotti.com/ (“deep linking”) are hereby expressly forbidden; automatic input links (“inline linking”), which allow the user to automatically display images from the Website in a specific space are not allowed either.
“Framing links”, which allow a page of the Website to be displayed on a certain page of another website, while making sure that the contents of the said page are displayed in a dedicated frame, instead of being shown in an independent window of the surfing browser, are also forbidden.
In this respect, it should be pointed out that failure to comply with the provisions of this section may be prosecuted in relation, for example, to unfair competition, as governed by current relevant provisions.

Modification
These terms of use may be modified by MINOTTI without notice at any time, provided that the users periodically examine the said terms of use before accessing the contents of the Website. 

Applicable Law and Place of Jurisdiction
These terms of use shall be governed by and construed in accordance with the Italian law.
Subject to the foregoing, any controversy arising out of or relating to the use of this Website, with specific reference to these terms of use, shall be settled by the Court of Milan.
Since these terms of use shall be construed in accordance with the laws of Italy, in the event of any disagreement in the interpretation of these terms of use between the Italian version and the English version, the Italian version shall prevail.

CONFERMO E PROCEDO